Obecnie jest tworzona treść tej sekcji.

Prosimy o ponowne odwiedziny wkrótce. Dziękujemy za zainteresowanie!

 

Polimerowe tworzywo sztuczne potocznie zwane plexi, pleksi, pleksiglass, pmma, szkło akrylowe, szkło organiczne, akryl, metakrylan.

Czterokrotnie lżejsze od szkła i 8-krotnie bardziej przeźroczyste, posiadające filtr UV,dostępne w wersji wylewanej (GS) i ekstrudowanej (XT).

 

Survey of PLEXIGLAS? Grades and Relevant Product Groups

PLEXIGLAS? GS

PLEXIGLAS? GS 209 (0Z09)

UV-absorbing special grade with increased heat deflection temperature

and better chemical resistance

PLEXIGLAS? GS 218 (0Z18)

UV-transmitting special grade for exacting demands

(e.g. for optical waveguides).

PLEXIGLAS? GS 221 (0F00)

Standard grade for blocks from 90 mm thickness, UV-absorbing

PLEXIGLAS? GS 222 (0F00)

Standard grade for blocks from 30?80 mm thickness, UV-absorbing

PLEXIGLAS? GS 231 (0A31)

UV-absorbing special grade for applications requiring high UV

protection, as well as for areas with strong sunlight

PLEXIGLAS? GS 232 (0F32)

Standard grade for tubes, UV-absorbing

PLEXIGLAS? GS 233 (0F00)

Standard solid sheet grade from 2 to 25 mm thickness, largely

UV-absorbing

PLEXIGLAS? GS 235

Clear special grade with increased heat deflection temperature,

yet more easy to form (e.g. for sanitaryware)

PLEXIGLAS? GS 241, 245, 249

Special grades approved for aircraft glazing, UV-absorbing, of

high optical quality

PLEXIGLAS? GS Colors

Transparent, translucent, opaque or fluorescent standard and

special grades

PLEXIGLAS RESIST? HP

Special solid sheet grade with greater impact strength and lower

rigidity, with high-gloss or satin surfaces, UV-absorbing, for

windshields on two-wheeled vehicles, tradeshow booth construction

and store fixtures, protective glazing etc.

PLEXIGLAS SATINICE? SC and DC

Clear and colored standard grades with one (SC) and two (DC)

satin surfaces for furniture, displays, illuminated signs and light

objects

PLEXIGLAS SOUNDSTOP? GS

UV-absorbing special solid sheet grade, complies with ZTV-Lsw

06, EN 1793 and EN 1794 for noise barriers

PLEXIGLAS SOUNDSTOP? GS CC

UV-absorbing special solid sheet grade with integrated PA

threads, complies with ZTV-Lsw 06, EN 1793 and EN 1794 for

noise barriers

PLEXIGLAS SUNACTIVE? GS 1)

UV-transmitting, highly UV-resistant clear and transparentcolored

special grades for tanning beds

PLEXIGLAS? GS SW and

PLEXIGLAS FREE FLOW? GS SW

Clear and colored special grades offering ease/particular ease

(FREE FLOW) of forming, with better chemical resistance and

higher heat deflection temperature; for sanitaryware

PLEXIGLAS truLED?

UV-absorbing special grades in specific colors for illuminated

signs with LEDs or colored neon tubing

PLEXIGLAS? MULTICOLOR

Special solid sheet grades from 9 mm thickness, consisting of two

or three transparent, translucent, opaque or fluorescent colored

layers, with high-gloss, satin or textured surfaces; for applications

with cutouts or decorative edge effects.

Textured PLEXIGLAS?

Trend Line

Standard grades of clear and transparent-colored solid sheets

with a textured surface for balcony parapets, decorative glazing

and promotional items

Our group of cast acrylic products furthermore comprises:

PLEXICOR?

Special grades of solid sheets and formed products made from

mineral-filled, opaquely colored acrylic material with surface

décors; for countertops and items of furniture, tradeshow booths

and store fixtures

PARAPAN?

High-gloss solid acrylic sheets in 18 mm main thickness with

special opaque standard and special colors for furniture fronts

2

PLEXIGLAS? XT

PLEXIGLAS? XT 20070 (0A000)

Standard solid sheet grade; largely UV-absorbing

PLEXIGLAS? XT 20070 HQ (0A000)

High-quality special grade of solid sheets, suitable for mirror

coating, largely UV-absorbing

PLEXIGLAS? XT 24370 (0A370)

UV-transmitting and highly UV-resistant clear standard grade of

solid sheet (for conservatories, patios, etc).

PLEXIGLAS? XT 29070 (0A070) bzw. 29080

Standard grades of PLEXIGLAS ALLTOP? SDP 16 double-skin

sheets, and of tubes and round rods; UV-transmitting

PLEXIGLAS ALLTOP? SP 3)

Group of multi-skin sheets (The ?Noble? Sheet) with a waterdispersing

coating on both surfaces and inside the cavities

PLEXIGLAS? EndLighten

UV-absorbing, ?forward-diffusing? special grade for edge-lit,

energy-saving and ultraslim illuminated signs

PLEXIGLAS? XT Colors

Transparent, translucent or opaque standard and special grades

PLEXIGLAS Gallery?

Family of UV-absorbing and UV-protecting standard grades for

glazing of pictures and exhibits

PLEXIGLAS HEATSTOP? XT / SP / WP 1)

IR-reflecting standard grades that greatly reduce incident solar

radiation of solid sheets, multi-skin sheets with a water-dispersing

NO DROP 2) coating on one side, and corrugated sheets; for

domed and continuous rooflights, patio and conservatory roofs

etc.; UV-absorbing

PLEXIGLAS RESIST? 4) 45, -65, -75, -100

Standard grades of solid sheets with higher, graded impact

strength and reduced rigidity, UV-absorbing

PLEXIGLAS? Satin Ice

Sheets, rods and tubes uniformely matte through and through,

for light objects and illuminated signs.

1) Europ. Patent EP 548 822

2) Europ. Patent EP 149 182

3) Europ. Patent EP 530 617

4) Europ. Patent EP 776 931

5) Europ. Patent EP 733 754

6) Europ. Patent EP 600 332

PLEXIGLAS RESIST? SP / WP 5)

Groups of multi-skin sheets (The ?Tough? Sheet) with higher impact

strength, with a water-dispersing NO DROP 2) coating on one side,

and corrugated sheets (The ?Tough? Sheet); UV-absorbing

PLEXIGLAS? XT RP

Satin, gray-transparent colored special grade made of special

molding compound, with specific lighting-engineering performance

for rear projection (RP)

PLEXIGLAS? Crystal Ice

Clear and colored standard grades with one (SC) and two (DC)

satin surfaces for picture glazing, furniture, displays, illuminated

signs and light objects

PLEXIGLAS SOUNDSTOP? XT 6)

UV-absorbing special grades of solid sheet, in accordance with

ZTV-Lsw 06, EN 1793 and EN 1794 for noise barriers

PLEXIGLAS? MIRROR XT

Various colored sheets of PLEXIGLAS? XT with one mirror

surface, back-painted

Textured PLEXIGLAS?

Classic Line

Standard grades of clear and transparent-colored solid sheets

with a textured surface for balcony parapets, decorative glazing

and promotional items

PLEXIGLAS SUNACTIVE? XT 24770 (0A770)

UV-transmitting, highly UV-resistant clear special grade for tanning

bed canopies; thickness max. 3 mm

3

PLEXIGLAS? GS PLEXIGLAS? XT

cast extruded

absolutely colorless and clear

break-resistant to impact-resistant

(PLEXIGLAS RESIST? HP)

break-resistant to impact-resistant

(PLEXIGLAS RESIST? 45 ? 100)

unequalled resistance to weathering and aging

high-quality surface and planarity; high-gloss,

textured or satin (PLEXIGLAS SATINICE? DC/SC)

very good surface; high-gloss, textured or satin

(PLEXIGLAS? Crystal Ice)

solid sheets, blocks, tubes, round and square rods

solid sheets, tubes, round rods, multi-skin sheets,

corrugated sheets, mirror sheets

2 mm to 160 mm solid sheet/block thickness

1.5 to 25 mm solid sheet thickness, multi-skin sheets

8, 16 and 32 mm thick

tandard sizes up to 3050 x 2030 mm

standard size 3050 x 2050 mm, extra lengths and

special sizes on request

over 50 standard color over 25 standard colors

good resistance to dilute acids and to alkalis

limited resistance to organic solvents

very easy to work, similar to hardwood easy to work, similar to hardwood

easy to thermoform over a wide range of conditions

very easy to thermoform under optimal, constant

conditions

easily and firmly bonded, e.g. with reaction adhesives

(e. g. ACRIFIX? 1R 0190, 1R 0192)

very easily bonded, also with solvent adhesives

(e. g. ACRIFIX? 1S 0116, 1S 0117)

burns more or less like hardwood;

very little smoke generation;

combustion gases are non-toxic and non-corrosive

max. service temperature approx. 80 °C max. service temperature approx. 70 °C

Application Characteristics of PLEXIGLAS?

4

Mechanical properties

PLEXIGLAS? GS

233; 222; 209;

(0F00; 0F00; 0Z09)

PLEXIGLAS? XT

20070; 29070

(0A000; 0A070)

PLEXIGLAS RESIST?

45; 65; 75; 100 Unit Teststandard

Density ? 1,19 1,19 1,19 g/cm3 ISO 1183

Impact strength acU (Charpy) 15 15 45; 65; 75; no break kJ/m2 ISO 179/1fu

Notched impact strengh aiN (lzod) 1,6 1,6 2,5; 4,5; 6,0; 6,5 kJ/m2 ISO 180/1 A

Notched impact strength acN (Charpy) ? ? 3,5; 6,5; 7,5; 8,0 kJ/m2 ISO 179/1eA

Tensile strength ?M

a) -40 °C

b) 23 °C

c) 70 °C

110

80

40

100

72

35

?

60; 50; 45; 40

? MPa ISO 527-2/1B/5

Elongation at break ?B 5,5 4,5 ? % ISO 527-2/1B/5

Nominal elongation at break ?tB ? ? 10; 15; 20; 25 % ISO 527-2/1B/50

Flexural strength ?bB, Standard test specimen

(80 x 10 x 4 mm3) 115 105 95; 85; 77; 69 MPa ISO 178

Compressive yield stress ?dF 110 103 ? MPa ISO 604

Max. safety stress ?max.

(up to 40 °C) 5?10 5?10 5?10 MPa ?

Modulus of elasticity Et

(short-term value) 3300 3300

2700; 2200;

2000; 1800 MPa ISO 527-2/1B/1

Min. cold bending radius 330 x thickness 330 x thickness

270 x thickness;

210 x thickness;

180 x thickness;

150 x thickness ? ?

Dynamic shear modulus G at approx. 10 Hz 1700 1700 ? MPa ISO 537

Indentation hardness H961/30 175 175

145; 130;

120; 100 MPa ISO 2039-1

Abrasion resistance in Taber abrader test

(100 rev.; 5,4 N; CS-10F) 20?30 20?30

20?30;

30?40;

30?40;

30?40; % haze ISO 9352

Coefficient of friction ?

a) plastic / plastic

b) plastic / steel

c) steel / plastic

0,8

0,5

0,45

0,8

0,5

0,45

???

? ?

Poisson?s ratio ?b

(dilatation speed of 5 % per min; up to 2 %

dilatation; at 23 °C) 0,37 0,37

0,41; 0,42,

0,41; 0,43 ? ISO 527-1

Resistance to puck impact from thickness

(Test Certificate No. from FMPA Stuttgart) ?

12 mm

(46/900 549)

-; 61); (6); 62) mm

(1)46/901 869/Sm/C;

2)46/901 870/Sm/C) ?

similar to

DIN 18 032,

Part 3

Acoustical properties

PLEXIGLAS? GS

233; 222; 209;

(0F00; 0F00; 0Z09)

PLEXIGLAS? XT

20070; 29070

(0A000; 0A070)

PLEXIGLAS RESIST?

45; 65; 75; 100 Unit Teststandard

Sound velocity

(at room temperature) 2700 ? 2800 2700 ? 2800 ? m/s ?

Weight sounded reduction index Rw

at thickness:

4 mm

6 mm

10 mm

26

30

32

26

30

32

?

?

? dB ?

Typical Property Values (at 23 °C and 50 % relative humidity)

5

Optical properties (of clear grades, at 3 mm thickness)

PLEXIGLAS? GS

233; 222; 209;

(0F00; 0F00; 0Z09)

PLEXIGLAS? XT

20070; 29070

(0A000; 0A070)

PLEXIGLAS RESIST?

45; 65; 75; 100 Unit Teststandard

Transmittance ?D65 ~ 92 ~ 92 ~ 91 % DIN 5036, Part 3

UV transmission no; no; no no; yes

no; no;

no; no ? ?

Reflecion loss the visible range

(for each surface) 4 4 4 % ?

Total energy transmittance g 85 85 85 % DIN EN 410

Adsorption in the visible range < 0,05 < 0,05 < 0,05 % ?

Refractive index nD

20 1,491 1,491 1,491 ? ISO 489

Behavior towards water

PLEXIGLAS? GS

233; 222; 209;

(0F00; 0F00; 0Z09)

PLEXIGLAS? XT

20070; 29070

(0A000; 0A070)

PLEXIGLAS RESIST?

45; 65; 75; 100 Unit Teststandard

Water absorption (24 hrs, 23 °C)

from dry state;

specimen 60 x 60 x 2 mm3 41 38 41; 45; 46; 49 mg

ISO 62,

Method 1

Max. weight gain

during immersion 2,1 2,1 2,1 %

ISO 62,

Method 1

Permeability to water vapour

N2

O2

CO2

air

2,3 ? 10?10

4,5 ? 10?15

2,0 ? 10?14

1,1 ? 10?13

8,3 ? 10?15

2,3 ? 10?10

4,5 ? 10?15

2,0 ? 10?14

1,1 ? 10?13

8,3 ? 10?15

?

?

?

?

?

g cm

????????

cm2 h Pa ?

Electrical properties

PLEXIGLAS? GS

233; 222; 209;

(0F00; 0F00; 0Z09)

PLEXIGLAS? XT

20070; 29070

(0A000; 0A070)

PLEXIGLAS RESIST?

45; 65; 75; 100 Unit Teststandard

Volume resistivity ?D > 1015 > 1015 > 1014 Ohm ? cm

DIN VDE 0303,

Part 3

Surface resistivity ? ROA 5 ? 1013 5 ? 1013 > 1014 Ohm

DIN VDE 0303,

Part 3

Dielectric strength Ed

(1 mm specimen thickness) ~ 30 ~ 30 ? kV/mm

DIN VDE 0303,

Part 2

Dielectric constant ?

at 50 Hz

at 0,1 MHz

3,6

2,7

3,7

2,8

?

?

?

?

DIN VDE 0303,

Part 4

Dissipation factor tan ?

at 50 H

at 0,1 MHz

0,06

0,02

0,06

0,03

?

?

?

?

DIN VDE 0303,

Part 4

Tracking, CTI-Value 600 600 ? ?

DIN VDE 0303,

Part 1

6

Thermal properties

PLEXIGLAS? GS

233; 222; 209;

(0F00; 0F00; 0Z09)

PLEXIGLAS? XT

20070; 29070

(0A000; 0A070)

PLEXIGLAS RESIST?

45; 65; 75; 100 Unit Teststandard

Coefficient of linear thermal expansion

? for 0?50 °C

7 ? 10-5

(= 0,07)

7 ? 10-5

(= 0,07)

7 ? 10-5; 8 ? 10-5; 9 ? 10-5;

11 ? 10-5 (0,07; 0,08;

0,09; 0,11)

1/K

(mm/m °C) DIN 53752-A

Possible expansion due to heat and

moisture 5 5 5; 6; 6; 8 mm/m ?

Thermal conductivity ? 0,19 0,19 ? W/mK DIN 52612

U-value, for thickness:

1 mm

3 mm

5 mm

10 mm

5,8

5,6

5,3

4,4

5,8

5,6

5,3

4,4

5,8

5,6

5,3

4,4 W/m2K DIN 4701

Specific heat c 1,47 1,47 1,47 J/gK ?

Forming temperature 160 ? 175 150 ? 160

150 ? 160;

140 ? 150;

140 ? 150;

140 ? 150 °C ?

Max. surface temperature

(IR radiator) 200 180 ? °C ?

Max. permanent service temperature 80 70 70; 70; 70; 65 °C ?

Reverse forming temperature > 80; > 80; > 90 > 80; > 80

> 80; > 80;

> 75; > 70 °C ?

Ignition temperature 425 430 ? °C DIN 51794

Smoke gas volume very little very little very little ? DIN 4102

Smoke gas toxicity non non non ? DIN 53436

Smoke gas corrosiveness non non non ? ?

Class

B2,

Class 3

TP (b)

B2

Class 3

TP (b)

B2

?

?

?

?

?

DIN 4102

BS 476, Part 7 + 6

BS 2782, Method

508 A

Fire rating E E E ? DIN EN 13501

German building inspectorate test

report P-K017 / 11.06 P-K018 / 02.07 P-K019 / 05.07 ? ?

Vicat softening temperature 115 103

102; 100;

100; 97 °C

ISO 306,

Method B 50

Heat deflection temperature

under load (HDT)

a) deflection 1,8 MPa

b) deflection 0,45 MPa

105; 105; 107

113; 113; 115

95

100

94; 93; 92; 90

99; 98; 96; 93 °C ISO 75

Global Availability

We sell our PLEXIGLAS? products both directly to fabricators and via a closely meshed network of distributors. The extensive

and efficient distribution system ensures that products are rapidly available throughout Europe, Asia, Australia and Africa. In the

Americas, the business unit has its own production facilities and distribution system. Our range is sold in that part of the world

under the ACRYLITE? trademark.

7

? = registered trademark

PLEXIGLAS, PLEXIGLAS ALLTOP, PLEXIGLAS

HEATSTOP, PLEXIGLAS RESIST, PLEXIGLAS

SATINICE, PLEXIGLAS SOUNDSTOP, PLEXIGLAS

SUNACTIVE and ACRIFIX,

are registered trademarks of

Evonik Röhm GmbH, Darmstadt, Germany.

Certified to DIN EN ISO 9001 (Quality)

and DIN EN ISO 14001 (Environment)

This information and all further technical advice

is based on our present knowledge and experience.

However, it implies no liability or other legal

responsibility on our part, including with regard

to existing third party intellectual property rights,

especially patent rights. In particular, no warranty,

whether express or implied, or guarantee of product

properties in the legal sense is intended or implied.

We reserve the right to make any changes according

to technological progress or further developments.

The customer is not released from the obligation to

conduct careful inspection and testing of incoming

goods. Performance of the product described herein

should be verified by testing, which should be carried

out only by qualified experts in the sole responsibility

of a customer. Reference to trade names used by

other companies is neither a recommendation, nor

does it imply that similar products could not be used.

Ref. No. 211-1 July 2008

xx/0708/09623 (en) 

 

Dane Techniczne

 

Zapraszamy na nasze serwisy www:

 

Z poważaniem,